Due to the lack of measurements in many regions, wave characteristics are estimated using different methods. Wave climate hindcasting/forecasting is mostly conducted by numerical models or empirical methods. Until now, different empirical methods have been developed for wave hindcasting. However, with the development of high speed processors, several sophisticated numerical models have been developed for wave prediction. These models are mostly phase-averaged spectral wave models developed in three generations. In the last two decades, third generation wave models have been used widely in academic and practical projects. In this regard, Port and Maritime Organization has produced his own model, PMO DYNAMIC. This model has been developed as a part of first three phases of Monitoring and Modeling of Study of Iranian Coasts project. PMO DYNAMIC package is a software available for engineering purposes. It has several modules that have been developed for different objectives. Wave model is the module which is used for the generation and transformation of wind waves in coastal areas. In this paper, in order to test the PMO DYNAMIC model capabilities, it has been applied for the prediction of wave parameters in Bushehr Bay and the results have been compared with MIKE21 SW model and measured data.

Background: In intertrochanteric fractures، DYNAMIC hip screw (DHS) is the most frequently used tool، but several studies did not give good results for this device in reverse-oblique and transverse fractures. Current study aimed to compare fixation results of reverse-oblique intertrochanteric and short-segment subtrochanteric fractures using DYNAMIC condylar screw (DCS) and DHS in patients referred to Alzahra and Kashani Hospitals in Isfahan, Iran.Methods: In a cross-sectional study، medical files of the patients referred to emergency units of the two hospitals who were diagnosed with intertrochanteric or subtrochanteric fractures and underwent DHS or DCS surgery more than 6 months before were assessed; they were invited for follow-up visit and examination. Written consent forms were taken from all the patients upon their entry; and they were examined in terms of complications including nonunion and failure of device and level of fracture improvement. These cases were evaluated by simple radiography ,too. Results obtained from examination of patients in addition to demographic information were recorded in the data collection form for each patient.Findings: Perfect union was observed in 14 (of 25) patients in DHS group and 21 (of 25) patients in DCS group (56% vs. 84%) six months after the surgery. Bone union was significantly better in DCS group (P=0.031). In addition, six months after the surgery, the devices used in 14 people in DHS group and 24 people in DCS group were fixed and the difference between the two groups was significant (P=0.001). 14 and 24 patients had total recovery in DHS and DCS groups، respectively (20% vs. 44%) with a significant difference (P=0.020).Conclusion: Considering obtained results, it can be concluded that using DCS is recommended over DHS due to severity of pain, bone union and fixation of the device.

In this paper, the concepts to compute reliabilities for stationary and ergodic conditions in the presence of time-invariant, non-ergodic parameters will first be reviewed. Focus will be on numerical techniques like FORM and numerical integration. The effect of correlation between the environmental processes within a sea state is studied. as opposed to between sea state correlation which proves be unimportant. The system reliability of jack-up structures is discussed using a combination of DYNAMIC simulation of a stick model and the static ANALYSIS of a detailed jack-up model. First, the DYNAMIC time domain simulation, the quasi-static time-domain simulation and the design wave ANALYSIS are applied for different sea-states using a stick structural model. In the second phase, the concepts of DYNAMIC Amplification Factors (DAF) and Calibration Factors (CF) are introduced for extreme responses of a detailed structural model of the jack-up structure. To utilize the analogical quantities for stick and detailed structural models, the design wave responses of the detailed structural model are linked with the extreme responses and the probabilistic models of DYNAMIC effects using a stick structural model.

One of the issues of reliable performance in the power grid is the existence of electromechanical oscillations between interconnected generators. The number of generators participating in each electromechanical oscillation mode and the frequency oscillation depends on the structure and function of the power grid. In this paper, to improve the transient nature of the network and damping electromechanical fluctuations, a decentralized robust adaptive control method based on DYNAMIC programming has been used to design a stabilizing power system and a complementary static var compensator (SVC) controller. By applying a single line to ground fault in the network, the robustness of the designed control systems is demonstrated. Also, the simulation results of the method used in this paper are compared with controllers whose parameters are adjusted using the PSO algorithm. The simulation results show the superiority of the decentralized robust adaptive control method based on DYNAMIC programming for the stabilizing design of the power system and the complementary SVC controller. The performance of the control method is tested using the IEEE 16-machine, 68-bus, 5-area is verified with time domain simulation.

Purpose: The flourishing of political parties and currents is one of the signs of the degree of development in societies. In contemporary Iran and since the formation of the constitutional movement, political currents have gone through many ups and downs and it can be said that political currents in Iran after the Islamic Revolution have not yet reached the stage of institutionalization and stability. A characteristic feature of political currents in Iran is the divergence and division among political currents in recent decades, and this can be one of the reasons for the instability and cross-sectional and seasonal activity of political parties in Iran. Therefore, the necessity of leading research seeks to answer the question of how factors and divergence among political currents in Iran after the victory of the Islamic Revolution can be analyzed? And what are the scenarios for the advancement of political currents in Iran?Method: To answer this question, the method of causal-layer ANALYSIS, which is one of the qualitative methods in futures research, has been used.Findings: The research findings indicate that this divergence is due to a wide range of reasons from the level of causal systems (from the institutionalization of power to the formation of parties as elitist initiatives), worldview and discourse (from charismatic political authority to culture). Subsidiary-follower politics to myth-metaphor (Iranian individualism to belief in a strong state-weak society) can be analyzed.Conclusions: Three scenarios for the future of Iranian political currents can be considered: integration of currents as the security valve of the political system, the collapse of political currents in the traditional form, integration and consolidation in new social movements (virtualized parties).